Atecpool pH Basic

The Atecpool pH Basic system allows you to measure the pH of the pool and correct it by injecting acid using a metering pump. It is composed of a control unit that measures ph and contains the control software and an integrated acid metering pump. To take into account the delay in measurement and avoid excessive dosing, the pump got alternate periods of pause and run of 100 seconds when you have to inject acid. All control and measurement functions are performed on the controller and are configured using an LCD screen, a 4-key keyboard and a simple menu system.

Specifications

  • Peristaltic pump head is easy to disassemble and replace
  • Standby: alarm display due to no flow in probe holder
  • Included: Dosing Pump 1,5l/h @ 1.5 Bar w/ pH
  • Electrode, Probe Holder, Calibration Solution for pH, and Fixing Brackets
  • Connection and installation kit
  • Dimensions: 218 x 125 x 95 mm
  • Input: 100-220 V AC +10%
  • Power 5 w

Specification Details
Code ATEC-PH001
Dosing Pump Capacity 1.5 L/h @ 1.5 bar
Dimensions 218 × 125 × 95 mm
Input 100–220 V AC +10%
Power 5 W
Control Interface LCD screen, 4-key keyboard and menu system
Dosing Operation Alternating pause/run cycles of 100 seconds during acid injection
Alarm Stand-by alarm display due to no flow in probe holder
Included pH electrode, probe holder, pH calibration solution, fixing brackets, connection and installation kit

 

Sacrificial Anode – Protective barrier against electrolytic corrosion

Recommended to be used with salt chlorinators, this zinc sacrificial anode protects pool equipment from electrolytic corrosion. It acts as a protective barrier for metal components such as stainless steel ladders, heat pumps and exchangers, UV-C stainless steel casings, lighting niches and face rings, aluminum pump motor housings and titanium cell plates in salt chlorinators. For optimal performance, the anode should be replaced once approximately 50% of the material has eroded, typically after around three years of use.

Specifications

  • Easy installation design by adding inline to existing 63mm /
  • 2” piping system
  • Excellent electric shock prevention in fiberglass pools
  • 4 Bar working pressure
  • Long-life pure zinc alloy anode
  • 1m 8 AWG solid copper wire and transparent lid for inspection

Download Catalogue

Download Manual

Download Warranty Letter